For one new electronic production, engineer need to evaluate and make some test before they decide to make into volume production. Low volume pcb assembly is widely defined as sample production.
What is the main work one should do in low volume pcb assembly stage? Of cousre, the gerber file and bom list of the project should be finished by the designer. One should consider the cost of the project and choose the right material, size of the unit board and the components’ part no. As you know the pcb cost contain pcb price, components price and the assembling cost. Each aspect should be controlled before you make the low volume pcb asssembly job.
To be specific, pcb price is based on the material, unit size and special process you choose for the board. Usually we would choose normal material with cheaper process,such like KB FR4 material with HASL surface treatment. For the component part, can used some cheaper and inglorious brands for the simple devices, such as capacitors,resistors and connectors. The assembling part is based on the components you choose. This part would be effect too much. So if you control these three parts well for the low volume pcb assembly job. You would make it in best cost.
The test job of the low volume pcb assembly would be very important. We may call it functional testing. So it is better to make functional testing before you make into volume production so that you can cut down your risk. We always like to make some functional testing before volume production. I think that is very important.
More interested about our pcb product, please see in the website:www.wonderfulpcb.com
My e-mail address: wonderful12@wonderfulpcb.com
flexible PCB,flexible PCB board,flexible circuit board,polyimide PCB,China flexible PCB manufacturer
2016年8月17日星期三
2016年8月10日星期三
Typical Types of PCB
As we know there
are many standards to specify PCB, such as material, function, construction and
so on. Now here we classify PCB according to construction. There are typically
three categories: Single Board, Double Sided Board and Multiple Sided Board.
Single Board
All PCBs have two
sides, top and bottom. But single sided PCB means only one side has the
conductive circuit that used to assemble components. The other side has no
circuit. It was born at early 1950s, generally applied at radios, washer,
automatic sales machine and all kinds of home or commercial machines. The
biggest merit of single board is cheap but the design of circuit is demanding.
Another thing is that it’s very easy to distinguish single sided PCB.
Double Sided
Board
Now we may have clear idea what is double sided PCB. That means both side of PCB have conductive circuit, which have lots of plated vias and PADs on them. Double sided PCB is widely used in electronic products. They will be used to CD player, mouse, fan, TV and so on. Compared to single board, double sided board are relatively complicated, so will be used at more advanced fields. Also, it’s easy to distinguish double sided PCB. Usually we could see circuit on both sides.
Multiple PCB
We could see also
has circuit on both sides of multiple PCB. But the difference between double
sided PCB is that see by side face of PCB, we will find multiple PCB material
has some black horizontal lines. Multiple PCB is much more complicated and
expensive than above two. Generally, there are three methods to manufacture
multiple sided boards: PTH, Clearance Hole and Build Up. PTH is the mainstream
of multiple sides board manufacture. High reliability and assembly density are
some merits of it. So it can be normally used at demanding high reliability and
technology field, such as military, aerospace, medical machines, communications
and so on.
Conclusion
Wonderful PCB (HK)
Limited is a professional manufacturer for PCB for more than 20 years. If
anything else doesn’t understand, welcome to inquiry to wonderful22@wonderfulpcb.com
2016年7月20日星期三
Laser Technology in PCB
In PCB production, actually, sometimes we will use the laser technology. U.K. researchers are exploring whether laser technology can provide a low-cost, chemical-free method of making printed circuit boards.
The project is developing a dry printing method that uses no chemicals. DMU’s Rapid Prototyping and Manufacturing Group, led by Professor David Wimpenny, will develop a deposition system based on a combination of laser printing and fiber laser consolidation of the deposited material. The project will initially look at laying conductive tracks on the circuit boards but could also be used to deposit layers of dielectric or protective materials, solder for connection of devices and also to print legends on boards. De Montfort University Leicester (DMU) academics are taking part in the Laser Printed Electronics (LPE) two-year research project aimed at providing an environmentally friendly production method for PCBs.
In commercial production, two kinds of laser technology can be used for laser drilling. One is CO2 laser, wavelength is in the wave band of far infrared ray. It is widely used in industrial micro hole (diameter is above 100um) drilling on printed circuit board. Due to very short punching time needed for one hole, so this kind of technology has high productivity. The other is ultraviolet laser , widely used in drilling holes with diameter less than 100 μm(especially productive when drilling diameter under 80μm) . The application of miniature circuit diagram enables diameter even to be less than 50μm. Therefore, in order to satisfy the increasing demand on micro via productivity, many manufacturers have started to introduce double-headed laser drilling system. The following is three main types in the present market:
· double-headed ultraviolet laser drilling system;
· double-headed CO2 laser drilling system;
· mixed laser drilling system(ultraviolet and CO2).
Each has its own advantages and disadvantages. Laser drilling system can simply be divided into two types: the double drill bits with single wavelength system and double drill bits with double wavelength system. No matter which type, there are two main parts affecting the drilling ability:
· laser energy/pulse energy;
· beam-positioning system.
Also, during FPC production, we will use laser technology to make the FPC shape. Wonderful PCB has many years experience in the laser technology production. If any need or questions, welcome your inquiry: China PCB Board Manufacturer
The project is developing a dry printing method that uses no chemicals. DMU’s Rapid Prototyping and Manufacturing Group, led by Professor David Wimpenny, will develop a deposition system based on a combination of laser printing and fiber laser consolidation of the deposited material. The project will initially look at laying conductive tracks on the circuit boards but could also be used to deposit layers of dielectric or protective materials, solder for connection of devices and also to print legends on boards. De Montfort University Leicester (DMU) academics are taking part in the Laser Printed Electronics (LPE) two-year research project aimed at providing an environmentally friendly production method for PCBs.
In commercial production, two kinds of laser technology can be used for laser drilling. One is CO2 laser, wavelength is in the wave band of far infrared ray. It is widely used in industrial micro hole (diameter is above 100um) drilling on printed circuit board. Due to very short punching time needed for one hole, so this kind of technology has high productivity. The other is ultraviolet laser , widely used in drilling holes with diameter less than 100 μm(especially productive when drilling diameter under 80μm) . The application of miniature circuit diagram enables diameter even to be less than 50μm. Therefore, in order to satisfy the increasing demand on micro via productivity, many manufacturers have started to introduce double-headed laser drilling system. The following is three main types in the present market:
· double-headed ultraviolet laser drilling system;
· double-headed CO2 laser drilling system;
· mixed laser drilling system(ultraviolet and CO2).
Each has its own advantages and disadvantages. Laser drilling system can simply be divided into two types: the double drill bits with single wavelength system and double drill bits with double wavelength system. No matter which type, there are two main parts affecting the drilling ability:
· laser energy/pulse energy;
· beam-positioning system.
Also, during FPC production, we will use laser technology to make the FPC shape. Wonderful PCB has many years experience in the laser technology production. If any need or questions, welcome your inquiry: China PCB Board Manufacturer
2016年7月18日星期一
Printed circuit board assembly
Components on a PCB are connected electronically to the designed circuits by two different methods. The first method is called "Through Hole Technology" and the second and newest method is called "Surface Mount Technology" Through Hole Technology requires a component that has thin wires, or leads, which are pushed through small holes in the substrate and soldered to connection pads in the circuits on the other side of the board. The contact with the holes and pull of gravity between the leads and the sides of the holes enables the components to stay in place until they are soldered. Surface Mount Technology has stubby J-shaped or L-shaped legs on each component keeping contact with the printed circuits directly.
A solder paste consisting of glue, flux, and solder are then applied at this point of contact to allow the components to be held in place until the actual solder is melted or "reflowed," in an special oven to make the final connection complete. Although surface mount technology requires greater attention and care in the placement of the components, its benefits are that it eliminates the time-consuming drilling process as well as the space-consuming connection pads characteristic with Through Hole Technology. In today’s manufacturing, both technologies are frequently used.
Wonderful PCB limited is a professional PCB manufacture, but we also experience in PCB assembly,for THT manufacture, we using semi-automatic and automatic insertion equipment and ensuring proper tape and reel component purchasing, we deliver timely and low-cost solutions. PCB assembly depot offers both automated and hand assembling of through hole components. Our assembly lines support both simple and complex board assemblies. For assemblies like nuts/bolts, riveting and studs, that require manual/mechanical assembly, we have a team of highly trained, qualified and experienced assemblers. We have advanced equipment for SMD from screen printers to smt placement machines to reflow ovens.
A solder paste consisting of glue, flux, and solder are then applied at this point of contact to allow the components to be held in place until the actual solder is melted or "reflowed," in an special oven to make the final connection complete. Although surface mount technology requires greater attention and care in the placement of the components, its benefits are that it eliminates the time-consuming drilling process as well as the space-consuming connection pads characteristic with Through Hole Technology. In today’s manufacturing, both technologies are frequently used.
Wonderful PCB limited is a professional PCB manufacture, but we also experience in PCB assembly,for THT manufacture, we using semi-automatic and automatic insertion equipment and ensuring proper tape and reel component purchasing, we deliver timely and low-cost solutions. PCB assembly depot offers both automated and hand assembling of through hole components. Our assembly lines support both simple and complex board assemblies. For assemblies like nuts/bolts, riveting and studs, that require manual/mechanical assembly, we have a team of highly trained, qualified and experienced assemblers. We have advanced equipment for SMD from screen printers to smt placement machines to reflow ovens.
2016年7月15日星期五
Printed circuit board with India Market
India is known to
be the fifth largest economy of the world with the second largest Gross
Domestic Product among many emerging economies. cheap Labour and more and more
skilled people in printed circuit board(PCB) industry
, attract customers all over the world buy PCB or
set up factory in india . But still many india company buy PCB from china, because we have very advanced
equipment and production capacity, also with highly skilled engineers .
In wonderful PCB Limited, 15% is Indian customers, some
cooperate with us more than 10 years, because we have very high quality and
good price, they don’t need to worry about any things for cooperating with us,
we have Professional Engineers to solve technical problem, perfect quality
inspection system and Good sales team for communication and service.
Our PCB capabilities include 1 to 28 layer PCB’s, Material
- FR4 , CEM1, CEM3, aluminum FPC, RFPC, and Special material, Thickness 0.8mm
to 6.5 mm, Copper Finish 1oz-6oz, Surface Finish - HASL Leaded free and HASL
with lead ,Immersion Gold/silver/Tin, flash gold, gold finger ,OSP.
2016年2月17日星期三
Materials of Flexible printed circuit board (PCB).
Each element of the flex circuit construction must be able to consistently meet the demands placed upon it for the life of the product. In addition, the material must work reliably in concert with the other elements of the flexible circuit construction to assure ease of manufacture and reliability. Following are brief descriptions of the basic elements of flex circuit construction and their functions.
The base material is the flexible polymer film which provides the foundation for the laminate. Under normal circumstances, the flex circuit base material provides most primary physical and electrical properties of the flexible circuit. In the case of adhesiveless circuit constructions, the base material provides all of the characteristic properties. While a wide range of thickness is possible, most flexible films are provided in a narrow range of relatively thin dimension from 12 µm to 125 µm (1/2 mil to 5 mils) but thinner and thicker material are possible. Thinner materials are of course more flexible and for most material, stiffness increase is proportional to the cube of thickness. Thus for example, means that if the thickness is doubled, the material becomes eight times stiffer and will only deflect 1/8 as much under the same load. There are a number of different materials used as base films including: polyester (PET), polyimide (PI), polyethylene napthalate (PEN), Polyetherimide (PEI), along with various fluropolymers (FEP) and copolymers. Polyimide films are most prevalent owing to their blend of advantageous electrical, mechanical, chemical and thermal properties.
Adhesives are used as the bonding medium for creating a laminate. When it comes to temperature resistance, the adhesive is also typically is the performance limiting element of a laminate especially when polyimide is the base material. Because of the earlier difficulties associated with polyimide adhesives, many polyimide flex circuits presently employ adhesive systems of different polymer families. However some newer thermoplastic polyimide adhesives are making important in-roads. As with the base films, adhesives come in different thickness. Thickness selection is typically a function of the application. For example, different adhesive thickness is commonly used in the creation of cover layers in order to meet the fill demands of different copper foil thickness which may be encountered.
A metal foil is most commonly used as the conductive element of a flexible laminate. The metal foil is the material from which the circuit paths are normally etched. A wide variety of metal foils of varying thickness are available from which to choose and create a flex circuit, however copper foils, serve the vast majority of all flexible circuit applications. Copper’s excellent balance of cost and physical and electrical performance attributes make it an excellent choice. There are actually many different types of copper foil. The IPC identifies eight different types of copper foil for printed circuits divided into two much broader categories, electrodeposited and wrought, each having four sub-types.) As a result, there are a number of different types of copper foil available for flex circuit applications to serve the varied purposes of different end products. With most copper foil, a thin surface treatment is commonly applied to one side of the foil to improve its adhesion to the base film. Copper foils are of two basic types: wrought (rolled) and electrodeposited and their properties are quite different. Rolled and annealed foils are the most common choice, however thinner films which are electroplated are becoming increasingly popular.
In certain non standard cases, the circuit manufacturer may be called upon to create a specialty laminate by using a specified alternative metal foil, such as a special copper alloy or other metal foil in the construction. This is accomplished by laminating the foil to a base film with or without an adhesive depending on the nature and properties of the base film.
2015年8月4日星期二
FPC Applications
Since January 2011 flexible circuit orders have been up sharply in every category - aerospace, defense, energy, general industrial and, especially, in the medical electronics sector.
FPC circuits can bescreen printed silver circuits on polyester. Flexible electronic assemblies may be manufactured using identical components used for rigid printed circuit boards, allowing the board to conform to a desired shape, or to flex during its use.
Flex circuits are often used as connectors in various applications where flexibility, space savings, or production constraints limit the serviceability of rigid circuit boards or hand wiring. A common application of flex circuits is in computer keyboards; most keyboards use flex circuits for the switch matrix. So actually we are very familiar with FPC circuits.
This website can provide you some images and more information about FPC circuit: http://www.wonderfulpcb.com/
Flexible circuits are found in industrial and medical devices where many interconnections are required in a compact package. Cellular telephones are another widespread example of flexible circuits.
Based on FPC technology a new circuit material develops very fast. That is rigid-flex printed circuit boards (RFPCs), in equipment used for rigid PCBs by utilizing new materials and process combinations. To reach higher packaging density at the PCB level, it is developed the technology with embedded active and passive components. However, in higher packaging density applications, the PCB-technology has to offer more flexibility to PCB-designers in order to effectively utilize space inside the electronic devices... That makes the birth of FPC circuits - different flexible PCB solutions are needed to achieve this goal.
2015年6月24日星期三
The importance of establishing a brand
![]() |
| WDF-FPC-D-20,double sided,wonderfulpcb.com |
When it comes to brands, we can throw you a lot of well-known brands. Life brand advertising can be seen everywhere. Brand has far exceeded the value of its own material values,it makes personal use of a brand has been upgraded to meet the psychological and spiritual values. Therefore, once a product brand success,the economic benefits it bring will be immeasurable. Thus, that a company establish a brand is very important.
WDF give guests a good impression, firstly reflected in the brand name. WDF is Wonderful meaning, it is an English word that means wonderful. It Contains praise meaning and the feeling is very good. So the brand name already has been a success. Secondly, it is the quality of the product. The success of an enterprise is not only the surface of things, really you need to have something inside. That is the product. How it reflects the value of your product? Your products will give good feedback to customers, so that customers feel that the use of your product is assured. Therefore, product quality is the most important. When a customer using your product feel at ease then your road to success began. Customers will continue to give you the next order, and even introduce his colleagues to give you new orders. This is the only way you can sell a better product. Quality is a quantitative change to qualitative change process, when more and more people know about your product ,after that people will be more concerned about your brand. People in the procurement time, will regard you as a contrast to the object. This time, your brand will play its powerful features, to bring you more customers. Furtherly, brand promotion is the premise of the brand started. WDF wants to do big business, wants more foreign friends know our brand, then you need to make greater efforts in the promotion. At present our company through the exhibition, the Alibaba, Global Sources and corporate websites to do their own brand. The company has foreign language department and sales department of Russian, is a relatively large sales team. Therefore, this requires the joint efforts of all the staff: to continue to do the promotion on the platform, fight promotions, lead to more customer focus; salesman to enhance their professional level, to show your specialty to your the customer, quality departments to maintain close contact with the plant, and to make sure the quality and quantity completed on time. Through continuous accumulation, expanding our customer base and our product quality assurance. And then we can get better and better WDF fame. Last point is to do for the success of a brand is too important for a company. Because the brand effect will not only allow us to get more customers, which in turn allows the body in its employees have a proud sense, can stimulate the morale of everyone. Let us work together to bring Wonderful into every corner of the world and achieve everyone Millions dream.
2015年6月1日星期一
PCB processes
Panelization is a procedure whereby a number of PCBs are grouped for manufacturing onto a larger board - the panel. Usually a panel consists of a single design but sometimes multiple designs are mixed on a single panel. There are two types of panels: assembly panels - often called arrays - and bare board manufacturing panels. The assembler often mount components on panels rather than single PCBs because this is efficient. The bare board manufactures always uses panels, not only for efficiency, but because of the requirements the plating process. Thus a manufacturing panel can consist of a grouping of individual PCBs or of arrays, depending on what must be delivered.
Chemical etching is usually done with ammonium persulfate or ferric chloride. For PTH (plated-through holes), additional steps of electroless deposition are done after the holes are drilled, then copper is electroplated to build up the thickness, the boards are screened, and plated with tin/lead. The tin/lead becomes the resist leaving the bare copper to be etched away.
The simplest method, used for small-scale production and often by hobbyists, is immersion etching, in which the board is submerged in etching solution such as ferric chloride. Compared with methods used for mass production, the etching time is long. Heat and agitation can be applied to the bath to speed the etching rate. In bubble etching, air is passed through the etchant bath to agitate the solution and speed up etching. Splash etching uses a motor-driven paddle to splash boards with etchant; the process has become commercially obsolete since it is not as fast as spray etching. In spray etching, the etchant solution is distributed over the boards by nozzles, and recirculated by pumps. Adjustment of the nozzle pattern, flow rate, temperature, and etchant composition gives predictable control of etching rates and high production rates.
As more copper is consumed from the boards, the etchant becomes saturated and less effective; different etchants have different capacities for copper, with some as high as 150 grams of copper per litre of solution. In commercial use, etchants can be regenerated to restore their activity, and the dissolved copper recovered and sold. Small-scale etching requires attention to disposal of used etchant, which is corrosive and toxic due to its metal content.
The etchant removes copper on all surfaces exposed by the resist. "Undercut" occurs when etchant attacks the thin edge of copper under the resist; this can reduce conductor widths and cause open-circuits. Careful control of etch time is required to prevent undercut. Where metallic plating is used as a resist, it can "overhang" which can cause short-circuits between adjacent traces when closely spaced. Overhang can be removed by wire-brushing the board after etching.
If you need expert PCB services, please feel free to contact me, wonderful02@wonderfulpcb.com
2015年5月4日星期一
Test Development Services Fixtureless Test
Rapidly increasing complexity of PCBA manufacturer makes visual defect detection nearly impossible. Receiving a PCBA without electrical verification can significantly delay design verification of prototypes and system integration of low volume PCBAs. The cost and time to develop fixture based in-circuit testing (ICT) is prohibitive in the prototype stage and the investment in ICT or functional test is tough to justify for low volume manufacturing.
Vergent Products offers a solution – flying probe fixtureless testing based on parametric test of each component. Fixtureless test development is low cost and very fast. There is no costly fixture to design and build. Tests are generated from CAD information which enables a high degree of test coverage and flexibility.
Testing your low volume products and prototypes allows for detection and repair of electrical defects such as wrong parts, reversed parts, missing parts, solder opens, and major solder defects. Fixtureless testing can help you improve your products time-to-market by achieving the highest possible quality levels early in the product life cycle. Fixtureless test allows your engineers to focus their efforts on prototype design verification instead of debugging process issues.
Fixtureless testers use a flexible moving probe system. Multiple probes are automatically moved very rapidly to various test points on the assembly – hence the name: “flying probe”. These probes are capable of static DC voltage, current, resistance, capacitance, and inductance measurements. Test points are derived from CAD data to ensure accuracy and to maximize test coverage.
Here is a brief description of some of the features of the Seica S40 has to offer:
•Four independently moving topside contact probes; Test speeds up to 12 – 20 tests per second
•Test area up to 16” x 20”
•Positioning repeatability accuracy of +/- 0.12mils; Minimum positioning resolution of +- 0.20 mils in each axes
•Minimum probe contact pitch of 0.12 mils between probe pins; Minimum pad size of 4.0 mils
•Maximum component height of 0.9 inches including board thickness
•Automated optical inspection, in-circuit programming, and boundary scan functional test capable (optional)
Component measuring ranges [minimum resolution]:
Voltage generator low voltage DC/AC 2 channels +- 1mV to +- 10V (+-0.1%)
Voltage generator high voltage DC/AC 1 channel +- 25mV to +- 100V (+-0.2%)
Voltage measurement DC/AC 1 channel +- 200uV to +- 100V
Current generator low current DC/AC 1 channel +- 1na to +- 0.5A (+-0.1%)
Current measurement DC/AC 1 channel +- 3na to +- 0.5A
Resistance measurement 1 channel .1 Ω to 100MΩ
Capacitance measurement 1 channel 1pF to 1F
Inductance measurement 1 channel 1uH to 1H
Zener Diode 1 channel up to 100V
Waveform generator Sine, Triangle, Arbitrary 1 channel 1 Hz to 3 mHz (+- 1 mHz) +- 10V max
Waveform generator Sine, Triangle, Arbitrary 1 channel 1 Hz to 10 kHz (+-10 mHz) +- 100V max
Frequency measurement 1 channel 0.1 Hz to 10 mHz
Digital embedded channel 1 channel +-12V 500ma @ 10Mhz
For best turn around time on board test program generation and debug please provide:
Schematics
ASCII CAD data
Raw card
Populated board
The test development NRE charges are very reasonable.
Vergent Products offers a solution – flying probe fixtureless testing based on parametric test of each component. Fixtureless test development is low cost and very fast. There is no costly fixture to design and build. Tests are generated from CAD information which enables a high degree of test coverage and flexibility.
Testing your low volume products and prototypes allows for detection and repair of electrical defects such as wrong parts, reversed parts, missing parts, solder opens, and major solder defects. Fixtureless testing can help you improve your products time-to-market by achieving the highest possible quality levels early in the product life cycle. Fixtureless test allows your engineers to focus their efforts on prototype design verification instead of debugging process issues.
Fixtureless testers use a flexible moving probe system. Multiple probes are automatically moved very rapidly to various test points on the assembly – hence the name: “flying probe”. These probes are capable of static DC voltage, current, resistance, capacitance, and inductance measurements. Test points are derived from CAD data to ensure accuracy and to maximize test coverage.
Here is a brief description of some of the features of the Seica S40 has to offer:
•Four independently moving topside contact probes; Test speeds up to 12 – 20 tests per second
•Test area up to 16” x 20”
•Positioning repeatability accuracy of +/- 0.12mils; Minimum positioning resolution of +- 0.20 mils in each axes
•Minimum probe contact pitch of 0.12 mils between probe pins; Minimum pad size of 4.0 mils
•Maximum component height of 0.9 inches including board thickness
•Automated optical inspection, in-circuit programming, and boundary scan functional test capable (optional)
Component measuring ranges [minimum resolution]:
Voltage generator low voltage DC/AC 2 channels +- 1mV to +- 10V (+-0.1%)
Voltage generator high voltage DC/AC 1 channel +- 25mV to +- 100V (+-0.2%)
Voltage measurement DC/AC 1 channel +- 200uV to +- 100V
Current generator low current DC/AC 1 channel +- 1na to +- 0.5A (+-0.1%)
Current measurement DC/AC 1 channel +- 3na to +- 0.5A
Resistance measurement 1 channel .1 Ω to 100MΩ
Capacitance measurement 1 channel 1pF to 1F
Inductance measurement 1 channel 1uH to 1H
Zener Diode 1 channel up to 100V
Waveform generator Sine, Triangle, Arbitrary 1 channel 1 Hz to 3 mHz (+- 1 mHz) +- 10V max
Waveform generator Sine, Triangle, Arbitrary 1 channel 1 Hz to 10 kHz (+-10 mHz) +- 100V max
Frequency measurement 1 channel 0.1 Hz to 10 mHz
Digital embedded channel 1 channel +-12V 500ma @ 10Mhz
For best turn around time on board test program generation and debug please provide:
Schematics
ASCII CAD data
Raw card
Populated board
The test development NRE charges are very reasonable.
2015年4月14日星期二
FPC assembly Pallets features
I would like to introduce the comparison between Magnetic reflow pallets and silica gel plate.
A. Stability: magnetic reflow pallet in magnetic state to even out the FPC, as the physical process, magnetic may increase or decrease according to request, don't change due to factors such as temperature, time, relatively stable.Silica gel plate adopt chemistry, will change under different temperature or Time or other condition, which lack of stability. Especially in the use of a certain period of time after a drop in viscosity, and not clean viscosity decreased during us, which cause FPC substrate deformation while crossing the reflow soldering and affect the welding quality.
B. Usage Life: magnetic reflow tray used in magnetic material and working principle of physical process, are high temperature resistant material,
As long as it's not destroyed by man or at accident situation, it can be permanent online. state can use permanent damage and accidents.Silica gel plate in use process, USES the chemical process,In use process, it will be aging of due to silicone materials, including Japan's material, no more than 1000 times return.The cost is very high.
C. Quality: magnetic reflow pallet at work on FPC insulating protection at the same time, FPC won’ t be destroyed when workman pick up the FPC.Silica gel plate in use process to ensure the smooth of FPC, has certain viscosity,and will stick to FPC, which will be difficulty for picking up FPC and may cause FPC deformation.
1.Comparison between Magnetic reflow pallets and normal plate
A.Quality: magnetic reflow pallet, because of FPC flat surface cause from the steel, reflow soldering will be reduced during FPC flow, which can guarantee the stability of welding quality, reduce adverse.Ordinary tray can only be used with high temperature tape around the FPC, after reflow soldering
, which easy to cause deformation to the middle part of FPC, tin water to overflow, cause bad welding, which will affect the quality. At the same time, magnetic
Reflow soldering tray can reduce some difficulty, like can avoid the high temperature stick to FPC lead to hard FPC being picked up or FPC deformation.
B. Cost: magnetic reflow soldering tray, convenient to use, reduce prework workers, and the person to take off the tape after reflow soldering, at meanwhile, can reduce the use amount of the high temperature tape. Investment is bigger at first time to magnetic reflow soldering tray, however, it has cost advantage for mass production.
A. Stability: magnetic reflow pallet in magnetic state to even out the FPC, as the physical process, magnetic may increase or decrease according to request, don't change due to factors such as temperature, time, relatively stable.Silica gel plate adopt chemistry, will change under different temperature or Time or other condition, which lack of stability. Especially in the use of a certain period of time after a drop in viscosity, and not clean viscosity decreased during us, which cause FPC substrate deformation while crossing the reflow soldering and affect the welding quality.
B. Usage Life: magnetic reflow tray used in magnetic material and working principle of physical process, are high temperature resistant material,
As long as it's not destroyed by man or at accident situation, it can be permanent online. state can use permanent damage and accidents.Silica gel plate in use process, USES the chemical process,In use process, it will be aging of due to silicone materials, including Japan's material, no more than 1000 times return.The cost is very high.
C. Quality: magnetic reflow pallet at work on FPC insulating protection at the same time, FPC won’ t be destroyed when workman pick up the FPC.Silica gel plate in use process to ensure the smooth of FPC, has certain viscosity,and will stick to FPC, which will be difficulty for picking up FPC and may cause FPC deformation.
1.Comparison between Magnetic reflow pallets and normal plate
A.Quality: magnetic reflow pallet, because of FPC flat surface cause from the steel, reflow soldering will be reduced during FPC flow, which can guarantee the stability of welding quality, reduce adverse.Ordinary tray can only be used with high temperature tape around the FPC, after reflow soldering
, which easy to cause deformation to the middle part of FPC, tin water to overflow, cause bad welding, which will affect the quality. At the same time, magnetic
Reflow soldering tray can reduce some difficulty, like can avoid the high temperature stick to FPC lead to hard FPC being picked up or FPC deformation.
B. Cost: magnetic reflow soldering tray, convenient to use, reduce prework workers, and the person to take off the tape after reflow soldering, at meanwhile, can reduce the use amount of the high temperature tape. Investment is bigger at first time to magnetic reflow soldering tray, however, it has cost advantage for mass production.
2015年3月30日星期一
Gold Finger PCB
Edge connector with Nickel plating (Ni) and gold (Au), suitable to wear style application for a full-featured product and customized quote. Tied using industry standard protocols allow electric plating nickel plating and the African Union in the etching.
With your Au selection, a standard 30-degree bevel will be added to your edge connector. We can also bevel at 15 or 45 degrees upon request. For multi-layer boards please insure adequate inner layer back set for the bevels. Gold Finger is the memory and the memory slots on the connection between the parts, all the signals are transmitted through the finger to. Gold finger by numerous golden composed of conductive contacts, but also because of its gold-plated conductive surface such as a finger-like arrangement of the contacts, so called "Gold finger." Gold finger is actually in the CCL through a special process and then covered with a layer of gold, because gold is very strong antioxidant activity, but also very strong conductivity. But because of the expensive price of gold is currently more memory are used instead of tin from the 90s of last century began to spread solder material, the current motherboard, memory and graphics cards and other devices "Gold finger" are almost always used tin material, only some high-performance server/workstation accessories will continue to use gold-plated contact point approach, the price of natural cheap.
Finger edge connectors are usually inserted into the mating groove to ease the connector. When this happens, the heart of the aircraft may be exposed copper if they do not quit this advantage fully. We will take you back to the inner layer of copper is higher than shown on the right in order to avoid exposure to copper in this location. Copper can cause direct exposure to all terminals short connector into it.
Wonderfulpcb is an experienced Aluminum pcb,Flexible pcb,Rigid-flex pcb,Multilayer pcb,PCBA manufacturer,PCB board manufacturer,provide various of printed circuit boards at competitive prices
With your Au selection, a standard 30-degree bevel will be added to your edge connector. We can also bevel at 15 or 45 degrees upon request. For multi-layer boards please insure adequate inner layer back set for the bevels. Gold Finger is the memory and the memory slots on the connection between the parts, all the signals are transmitted through the finger to. Gold finger by numerous golden composed of conductive contacts, but also because of its gold-plated conductive surface such as a finger-like arrangement of the contacts, so called "Gold finger." Gold finger is actually in the CCL through a special process and then covered with a layer of gold, because gold is very strong antioxidant activity, but also very strong conductivity. But because of the expensive price of gold is currently more memory are used instead of tin from the 90s of last century began to spread solder material, the current motherboard, memory and graphics cards and other devices "Gold finger" are almost always used tin material, only some high-performance server/workstation accessories will continue to use gold-plated contact point approach, the price of natural cheap.
Finger edge connectors are usually inserted into the mating groove to ease the connector. When this happens, the heart of the aircraft may be exposed copper if they do not quit this advantage fully. We will take you back to the inner layer of copper is higher than shown on the right in order to avoid exposure to copper in this location. Copper can cause direct exposure to all terminals short connector into it.
Wonderfulpcb is an experienced Aluminum pcb,Flexible pcb,Rigid-flex pcb,Multilayer pcb,PCBA manufacturer,PCB board manufacturer,provide various of printed circuit boards at competitive prices
2015年3月25日星期三
Aluminum board process-A
the production of aluminum pcb specification
1. Preface: with the development and progress of electronic technology, electronic products to the light, thin, small, personalization, high reliability, muti_function change has become an inevitable trend.And out of aluminum plate conform to this trend, the product with excellent heat resistance, machinability, dimensional stability and electrical performance in hybrid integrated circuit, automobiles, office automation, high-power electrical equipment, power equipment, and other fields has been widely applied in recent years.Aluminium base copper clad by Japanese sanyo company first invented in 1969, our country began in 1988, development and production of Edna, developed and mass production began in 2000 in order to adapt to the mass production, mass production, artificial this production specification.
2. Scope: this production specifications for the production of aluminium base copper clad introduces the whole process and specification, to ensure that the board in our production smoothly.
3. Process: cutting and drilling→ dry film optical imaging→check board→etching→ corrosion inspection→solder mask→character →green inspection→ HASL→aluminum surface treatment→impact→final inspection→packaging→shipment
4. Note:
4.1 aluminum sheet is expensive, should pay special attention to the standardization of operation in the process of production, put an end to scrap phenomenon caused by the non-standard operations.
4.2 each working procedure is operated operators must take put down gently, in order to avoid the plate and aluminum surface clean.
4.3 operators, each process should try to avoid hand contact with aluminum plate, the effective area after spray tin and process the board shall hold the edge, only when it is strictly prohibited to finger directly touch the board inside.
4.4 aluminum board belongs to the special board, should cause district attaches great importance to each process and its production supervisor, foreman, personal quality, guarantee the smooth plate in the process of production.
5. The special production process flow and parameters:
5.1 material cutting
5.1.1 strengthen incoming inspection (must use aluminum sheet metal surface has a protective film).
5.1.2 without baking plate after cutting.
5.1.3 light to take light put, pay attention to the protection of the aluminum surface (protective film).
5.2 drilling
5.2.1 drilling parameters and FR - 4 plate drilling parameters are the same.
5.2.2 aperture tolerance yan, 4 oz base Cu attention to control the generation of the beatles feng.
5.2.3 requires copper on the hole.
5.3 the dry film
5.3.1 incoming inspection: before grinding plate must be inspection on aluminum surface protective film, if there is any breakage, must be fastened with welan again after pretreatment.
5.3.2 grinding plate: only on copper surface for processing.
5.3.3 the paster: copper, aluminum surface shall be sticker.
Control grinding plate and the lamination time interval is less than 1 minute, ensure the paster temperature stability.
5.3.4 clappers: pay attention to the clappers precision.
5.3.5 exposure, exposure ruler: 7 ~ 9 have glue.
5.3.6 development: stress: 20 ~ 35 psi speed: 2.0 ~ 2.6 m/min, the operator must be careful operation, avoid the protective film and aluminum chafed below.
5.3 the dry film
5.3.1 incoming inspection: before grinding plate must be inspection on aluminum surface protective film, if there is any breakage, must be fastened with welan again after pretreatment.
1. Preface: with the development and progress of electronic technology, electronic products to the light, thin, small, personalization, high reliability, muti_function change has become an inevitable trend.And out of aluminum plate conform to this trend, the product with excellent heat resistance, machinability, dimensional stability and electrical performance in hybrid integrated circuit, automobiles, office automation, high-power electrical equipment, power equipment, and other fields has been widely applied in recent years.Aluminium base copper clad by Japanese sanyo company first invented in 1969, our country began in 1988, development and production of Edna, developed and mass production began in 2000 in order to adapt to the mass production, mass production, artificial this production specification.
2. Scope: this production specifications for the production of aluminium base copper clad introduces the whole process and specification, to ensure that the board in our production smoothly.
3. Process: cutting and drilling→ dry film optical imaging→check board→etching→ corrosion inspection→solder mask→character →green inspection→ HASL→aluminum surface treatment→impact→final inspection→packaging→shipment
4. Note:
4.1 aluminum sheet is expensive, should pay special attention to the standardization of operation in the process of production, put an end to scrap phenomenon caused by the non-standard operations.
4.2 each working procedure is operated operators must take put down gently, in order to avoid the plate and aluminum surface clean.
4.3 operators, each process should try to avoid hand contact with aluminum plate, the effective area after spray tin and process the board shall hold the edge, only when it is strictly prohibited to finger directly touch the board inside.
4.4 aluminum board belongs to the special board, should cause district attaches great importance to each process and its production supervisor, foreman, personal quality, guarantee the smooth plate in the process of production.
5. The special production process flow and parameters:
5.1 material cutting
5.1.1 strengthen incoming inspection (must use aluminum sheet metal surface has a protective film).
5.1.2 without baking plate after cutting.
5.1.3 light to take light put, pay attention to the protection of the aluminum surface (protective film).
5.2 drilling
5.2.1 drilling parameters and FR - 4 plate drilling parameters are the same.
5.2.2 aperture tolerance yan, 4 oz base Cu attention to control the generation of the beatles feng.
5.2.3 requires copper on the hole.
5.3 the dry film
5.3.1 incoming inspection: before grinding plate must be inspection on aluminum surface protective film, if there is any breakage, must be fastened with welan again after pretreatment.
5.3.2 grinding plate: only on copper surface for processing.
5.3.3 the paster: copper, aluminum surface shall be sticker.
Control grinding plate and the lamination time interval is less than 1 minute, ensure the paster temperature stability.
5.3.4 clappers: pay attention to the clappers precision.
5.3.5 exposure, exposure ruler: 7 ~ 9 have glue.
5.3.6 development: stress: 20 ~ 35 psi speed: 2.0 ~ 2.6 m/min, the operator must be careful operation, avoid the protective film and aluminum chafed below.
5.3 the dry film
5.3.1 incoming inspection: before grinding plate must be inspection on aluminum surface protective film, if there is any breakage, must be fastened with welan again after pretreatment.
2015年3月19日星期四
Global And China FPCB Industry Report, 2014
In 2013, FPCB industry enjoyed a high-speed growth with the market size approximating USD12.03 billion, up 16.2% from the level in 2012. The South Korean vendors developed rapidly and were excessively upbeat about the industry’s outlook, aggressively expanding capacity starting from the very beginning of 2012. As a result, most of new capacity was available in Q2 2013. However, the FPCB companies in South Korea without diversified customers, were heavily dependent on the key accounts such as Samsung and LG, thus making them less competitive during negotiations. Therefore, these vendors cut the prices steeply in Q4 2013, sending them into price war.
In 2014, price decline continued to deteriorate, which led to a sharp fall in revenue of South Korean vendors. The implications of high-speed capacity expansion are high fixed costs, which would thus result in a plunge in profit margin. It is projected that the revenue of INTERFLEX, a leading South Korean FPCB company, would tumble by 50%, and its operating margin would record a 27% loss in 2014 in contrast to no-profit-no-loss in 2013. Additionally, affected by the order shift of Apple, the company has hardly received any orders from Apple in 2014.
Another pressure for the vendors in South Korea came from the depreciated yen, and the won appreciated against the yen. However, the Japanese products have better performance; coupled with the reduced prices bought on by yen depreciation, they are more competitive.
Apple shortened the supply chain, giving more of its orders to the vendors in Taiwan, which resulted in a fall in revenue of M-Flex, at an estimated 20% drop in 2014. And as the losses expand, M-Flex’s operating margin is expected to slip from -8.4% in 2013 to -11.8%.
Despite a substantial decline in revenue of the South Korean vendors, the biggest customer of FPCB market—Apple did not bring down the purchase price. Meanwhile, the new iPhones have bigger size and therefore need more FPCBs. Consequently, the vendors in Taiwan and Japan saw a big increase in revenue, thereby filling in the vacuum. We predict that in 2014 the market size of FPCB worldwide reached USD12.608 billion, up 4.8% from 2013.
Of the Taiwanese vendors, ZDT generated the most revenue. ZDT under Hon Hai obtained more of the orders from Apple. It is forecasted that its revenue will jump by 55% to USD1.518 billion in 2014, overtaking Japan’s SEI as the world's second. In contrast, the world’s first NOK reduced the capacity in Japan, instead expanded the capacity in Thailand and Mainland China, which helped not only substantially increase its revenue but also rapidly turn out of red. At the same time, the global HDD market tends to be stable, with the shipments rising mildly from 2013. The HDD for FPCB is the main product of NOK, an Apple's leading supplier.
We project that in 2015 smartphones will present a slowing growth, tablet PCs will begin to decline, notebook computers will grow slightly or be flat. Moreover, LCD-TVs are expected to grow by a small margin. And wearable devices are very likely to rise significantly, but its application of FPCB is too small to fuel the market. In 2015, it is more than likely that LCD-TV will be the mainstay to drive the market. And after 6-8 years of popularization, LCD-TV is expected to undergo a boom of TV set replacement. And consumers will choose 4K TV with higher resolution or change the original smaller 32-37 inch television to 40-42 inch television.
We expect that it will be very hard for the South Korean vendors to reverse the downtrend when Samsung’s mobile phone shipments slow down and its LCD shipments are falling with losses. It is more likely that the South Korean vendors will suffer collapse, while the companies from Japan and China’s Taiwan will benefit from it, especially Japanese ones that had improved the competitiveness after the repeated depreciation of yen.
http://www.wonderfulpcb.com/Flexible-PCB.html
flexible PCB,flexible PCB board,flexible circuit board,polyimide PCB
In 2014, price decline continued to deteriorate, which led to a sharp fall in revenue of South Korean vendors. The implications of high-speed capacity expansion are high fixed costs, which would thus result in a plunge in profit margin. It is projected that the revenue of INTERFLEX, a leading South Korean FPCB company, would tumble by 50%, and its operating margin would record a 27% loss in 2014 in contrast to no-profit-no-loss in 2013. Additionally, affected by the order shift of Apple, the company has hardly received any orders from Apple in 2014.
Another pressure for the vendors in South Korea came from the depreciated yen, and the won appreciated against the yen. However, the Japanese products have better performance; coupled with the reduced prices bought on by yen depreciation, they are more competitive.
Apple shortened the supply chain, giving more of its orders to the vendors in Taiwan, which resulted in a fall in revenue of M-Flex, at an estimated 20% drop in 2014. And as the losses expand, M-Flex’s operating margin is expected to slip from -8.4% in 2013 to -11.8%.
Despite a substantial decline in revenue of the South Korean vendors, the biggest customer of FPCB market—Apple did not bring down the purchase price. Meanwhile, the new iPhones have bigger size and therefore need more FPCBs. Consequently, the vendors in Taiwan and Japan saw a big increase in revenue, thereby filling in the vacuum. We predict that in 2014 the market size of FPCB worldwide reached USD12.608 billion, up 4.8% from 2013.
Of the Taiwanese vendors, ZDT generated the most revenue. ZDT under Hon Hai obtained more of the orders from Apple. It is forecasted that its revenue will jump by 55% to USD1.518 billion in 2014, overtaking Japan’s SEI as the world's second. In contrast, the world’s first NOK reduced the capacity in Japan, instead expanded the capacity in Thailand and Mainland China, which helped not only substantially increase its revenue but also rapidly turn out of red. At the same time, the global HDD market tends to be stable, with the shipments rising mildly from 2013. The HDD for FPCB is the main product of NOK, an Apple's leading supplier.
We project that in 2015 smartphones will present a slowing growth, tablet PCs will begin to decline, notebook computers will grow slightly or be flat. Moreover, LCD-TVs are expected to grow by a small margin. And wearable devices are very likely to rise significantly, but its application of FPCB is too small to fuel the market. In 2015, it is more than likely that LCD-TV will be the mainstay to drive the market. And after 6-8 years of popularization, LCD-TV is expected to undergo a boom of TV set replacement. And consumers will choose 4K TV with higher resolution or change the original smaller 32-37 inch television to 40-42 inch television.
We expect that it will be very hard for the South Korean vendors to reverse the downtrend when Samsung’s mobile phone shipments slow down and its LCD shipments are falling with losses. It is more likely that the South Korean vendors will suffer collapse, while the companies from Japan and China’s Taiwan will benefit from it, especially Japanese ones that had improved the competitiveness after the repeated depreciation of yen.
http://www.wonderfulpcb.com/Flexible-PCB.html
flexible PCB,flexible PCB board,flexible circuit board,polyimide PCB
2015年3月18日星期三
FPC Assembly
Nowadays, technology is already very mature to rigid Printed circuit board, however, many problem may be faced by operator during SMT to FPC.
1 False soldering, short soldering,Tin beads.
2.The Reason is due to the hardness of raw material of FPC(Flexible printed circuit) caused, FPC is out of shape when meet the hot air and high temperature in reflew machine. Lead the wave shape to FPC, and the slop to FPC pads, then cause the flow of molten tin (liquid tin under high temperature), which cause False soldering, short soldering,Tin beads.(The main reason is the hardness of FPC). So if make the hardness of FPC into the same situation as rigid printed circuit board, and all soldering problem to FPC can be solved. The condition is you should know the SMT process to PCB. And then improve the hardness of Flexible Printed circuit into with the same hardness as rigid PCB, and then FPC SMT can be realized. And some problem, like no fix hole, no mark point, or the FPC is over long, which are the fault of designer, and it is also hard to be solved even to rigid PCB SMT. And NG rate can be only reduced based on personal experience or device independence.
According to above comment, the main solution is to improve the hardness of FPC the same as hardness of rigid PCB.
B. How to realize stable soldering to FPC
How to get the stable FPC (flexible circuit board) to the rigid PCB welding effects depends on the degree of hardness.
Methods: using jigs(carrier, handling plate) to make FPC perform as rigid board during SMT.
Below is the instruction of Magnetic reflow soldering tray
The material
1. Choose imported alloy material: good flatness, stable performance under high temperature
2. High temperature resistant magnet (300 degrees) to ensure permanent magnet during reflow soldering process.
3.The special steel, with magnetic treatment and good elasticity, and no deformation under high temperature.
4.Performance
(1) Because the flatness to FPC surface cause from the steel pressure l, it can reduce the flow of solder tin during reflow, which can ensure the good quality of soldering and reduce the NG soldering at meanwhile.
(2) Ensure the life of tray when choosing tray material.
(3) Easy and convenient operation with high stability.
(4) Heat insulation, prevent the FPC from deformation
There’s no special requirement to the composition of solder paste of FPC, the size of the tin ball particles and the amount of metal content, etc will be subject to if there is narrow space of IC pins on FPC, BUT FPC has high performance requirements to the solder paste printing, solder paste should has good thixotropy, solder paste should be able to easily be printed , demoulding and can be firmly adhere to the surface of FPC, there will be no mold release lead the hole in stencil filled with tin or such as collapse after printing.
Because FPC fixed on the pallet before SMT, and the FPC with high temperature heat-resistant pressure-sensitive adhesive tapes for purpose of location, which make its planar inconsistencies, thus FPC printing surface is unlikely to be as smooth as rigid PCB and the same consistent on thickness and hardness, so operator should not use a metal scraper, and should use the polyurethane scraper which with hardness of 80-90 degree.
Solder paste printing machine is best to be with the best optical positioning system, otherwise will have great influence to printing quality, FPC although fixed on the load board, however, there always be small space between FPC and the load board, this is the biggest difference as rigid PCB board, thus the equipment parameters’s setting will also has great influence to the printing effect.
Printing stations is also the key location to prevent FPC from being smudgy, need to wear glove then can go ahead for operation, at meanwhile, workstation should be kept clean, stencil should be frequently wiped to be clean, to prevent the solder paste to pollute the gold fingers and gold plated key button.
Control of FPC SMT
According to the properties of the products, components quantity and efficiency of mounting, it is OK to adopt high-speed placement machine for SMT. Because every piece of FPC has positioning with fiducial MARK, therefore, there’s no big difference on surface mounting technology between FPC SMD mounting and rigid PCB SMD mounting. It is important to note that although the FPC are fixed on the load board, but its surface can’t be the same flatness like rigid PCB board surface, local space must exist between FPC and load board, so, the height of suction nozzle’s dropping, compression of blowing should be exactly setted. On other side, most bare FPC performance as panel; format, and the rate of good finished product relatively low, so it if normal that there’re part of pieces with not good quality, which request recognition function on BAD MARK to SMT machine, otherwise, when mounting FPC panel with the status of not all pieces are good, will show low efficiency.
1 False soldering, short soldering,Tin beads.
2.The Reason is due to the hardness of raw material of FPC(Flexible printed circuit) caused, FPC is out of shape when meet the hot air and high temperature in reflew machine. Lead the wave shape to FPC, and the slop to FPC pads, then cause the flow of molten tin (liquid tin under high temperature), which cause False soldering, short soldering,Tin beads.(The main reason is the hardness of FPC). So if make the hardness of FPC into the same situation as rigid printed circuit board, and all soldering problem to FPC can be solved. The condition is you should know the SMT process to PCB. And then improve the hardness of Flexible Printed circuit into with the same hardness as rigid PCB, and then FPC SMT can be realized. And some problem, like no fix hole, no mark point, or the FPC is over long, which are the fault of designer, and it is also hard to be solved even to rigid PCB SMT. And NG rate can be only reduced based on personal experience or device independence.
According to above comment, the main solution is to improve the hardness of FPC the same as hardness of rigid PCB.
B. How to realize stable soldering to FPC
How to get the stable FPC (flexible circuit board) to the rigid PCB welding effects depends on the degree of hardness.
Methods: using jigs(carrier, handling plate) to make FPC perform as rigid board during SMT.
Below is the instruction of Magnetic reflow soldering tray
The material
1. Choose imported alloy material: good flatness, stable performance under high temperature
2. High temperature resistant magnet (300 degrees) to ensure permanent magnet during reflow soldering process.
3.The special steel, with magnetic treatment and good elasticity, and no deformation under high temperature.
4.Performance
(1) Because the flatness to FPC surface cause from the steel pressure l, it can reduce the flow of solder tin during reflow, which can ensure the good quality of soldering and reduce the NG soldering at meanwhile.
(2) Ensure the life of tray when choosing tray material.
(3) Easy and convenient operation with high stability.
(4) Heat insulation, prevent the FPC from deformation
There’s no special requirement to the composition of solder paste of FPC, the size of the tin ball particles and the amount of metal content, etc will be subject to if there is narrow space of IC pins on FPC, BUT FPC has high performance requirements to the solder paste printing, solder paste should has good thixotropy, solder paste should be able to easily be printed , demoulding and can be firmly adhere to the surface of FPC, there will be no mold release lead the hole in stencil filled with tin or such as collapse after printing.
Because FPC fixed on the pallet before SMT, and the FPC with high temperature heat-resistant pressure-sensitive adhesive tapes for purpose of location, which make its planar inconsistencies, thus FPC printing surface is unlikely to be as smooth as rigid PCB and the same consistent on thickness and hardness, so operator should not use a metal scraper, and should use the polyurethane scraper which with hardness of 80-90 degree.
Solder paste printing machine is best to be with the best optical positioning system, otherwise will have great influence to printing quality, FPC although fixed on the load board, however, there always be small space between FPC and the load board, this is the biggest difference as rigid PCB board, thus the equipment parameters’s setting will also has great influence to the printing effect.
Printing stations is also the key location to prevent FPC from being smudgy, need to wear glove then can go ahead for operation, at meanwhile, workstation should be kept clean, stencil should be frequently wiped to be clean, to prevent the solder paste to pollute the gold fingers and gold plated key button.
Control of FPC SMT
According to the properties of the products, components quantity and efficiency of mounting, it is OK to adopt high-speed placement machine for SMT. Because every piece of FPC has positioning with fiducial MARK, therefore, there’s no big difference on surface mounting technology between FPC SMD mounting and rigid PCB SMD mounting. It is important to note that although the FPC are fixed on the load board, but its surface can’t be the same flatness like rigid PCB board surface, local space must exist between FPC and load board, so, the height of suction nozzle’s dropping, compression of blowing should be exactly setted. On other side, most bare FPC performance as panel; format, and the rate of good finished product relatively low, so it if normal that there’re part of pieces with not good quality, which request recognition function on BAD MARK to SMT machine, otherwise, when mounting FPC panel with the status of not all pieces are good, will show low efficiency.
2015年3月16日星期一
Multilayer PCB design method (W)
11.4.1 The Multilayer PCB design related Settings
1. Power Plane Clearance
This rule is used to set the electric layer security spacing, mainly refers to no Internet connection and the electrical layer of bonding pad and the hole and the electrical layer security spacing, as shown in figure 11 -11. At the time of manufacture, no Internet connection and the electrical layer of bonding pad in through electrical layer around the copper film is corrosion, corrosion of the size of the ring is, the value of the constraint set.
2. Power Plane Connect Style
This rule is used to set the electric welding plate and the layer forms.Mainly refers to a network connection with the electrical layer within the welding plate and the hole and the electrical connection between the form. As shown in figure 11-12.
Click the Properties button, pop-up its rules Settings dialog box, as shown in figure 11-13., the applicable scope of the rules on the left side of the dialog box to Rule the Attributes on the right side of the drop-down list to choose connection mode: Relief Connect, Direct Connect and No Connect. The Direct Connect directly connected, the electric welding plate inside through layer did not drop the copper film around the corrosion, electric welding plate and inside layer copper film directly connected;No connect to show No connection, that is, with the copper film network bonding pad of the same name will not be connected to the inside electrode layer;Designers usually use the system default Relief Connect connection forms, the rules of the Settings dialog box shown in figure 11-13.
Ms Grace Zhang
________________________________
Oversea sales
Wonderful PCB
A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China
T +86-755-86229518-809 | F +86 755 2607 3529| e wonderful16@wonderfulpcb.com |
w www.wonderfulpcb.com | Skype:wonderful16 | MSN: wonderful16@hotmail.com
1. Power Plane Clearance
This rule is used to set the electric layer security spacing, mainly refers to no Internet connection and the electrical layer of bonding pad and the hole and the electrical layer security spacing, as shown in figure 11 -11. At the time of manufacture, no Internet connection and the electrical layer of bonding pad in through electrical layer around the copper film is corrosion, corrosion of the size of the ring is, the value of the constraint set.
2. Power Plane Connect Style
This rule is used to set the electric welding plate and the layer forms.Mainly refers to a network connection with the electrical layer within the welding plate and the hole and the electrical connection between the form. As shown in figure 11-12.
Click the Properties button, pop-up its rules Settings dialog box, as shown in figure 11-13., the applicable scope of the rules on the left side of the dialog box to Rule the Attributes on the right side of the drop-down list to choose connection mode: Relief Connect, Direct Connect and No Connect. The Direct Connect directly connected, the electric welding plate inside through layer did not drop the copper film around the corrosion, electric welding plate and inside layer copper film directly connected;No connect to show No connection, that is, with the copper film network bonding pad of the same name will not be connected to the inside electrode layer;Designers usually use the system default Relief Connect connection forms, the rules of the Settings dialog box shown in figure 11-13.
Ms Grace Zhang
________________________________
Oversea sales
Wonderful PCB
A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China
T +86-755-86229518-809 | F +86 755 2607 3529| e wonderful16@wonderfulpcb.com |
w www.wonderfulpcb.com | Skype:wonderful16 | MSN: wonderful16@hotmail.com
Multilayer PCB design method (U)
(3) Delete: delete layer. In addition to top layer and bottom layer cannot be deleted, other signal layer and internal power layer all can be deleted, but have wiring in the middle of the signal and has been integral in electricity layer cannot be deleted. Choose the Multilayer pcb layer which need to delete, click on the button, pop up as shown in figure 11-8 dialog, click Yes button, the layer is removed.
(4) Move up: up a layer. Choose the layer which need to up (layer can be a signal layer, it can also be power layer), click the button, then the layer move a layer at the meeting, but not more than the top layer.
(5) Move down: down a layer. Similar as move up button, click on this button, this layer will move down a layer, but not more than the bottom layer.
(6) Properties. Click the button, the pop-up similar as shown in figure 11-3 layer properties dialog box.
11.3.3 Middle layer settle
Completion of the layer stack manager related Settings, click the OK button to exit the layer stack manager, can be done in PCB editor interface related operations. On the middle layer operation, need to first set up the middle layer is displayed in the PCB editor interface. Select “Design”/”Options…” Command the pop-up as shown in figure 11-9 option settings dialog box, under an Internal planes of the electricity option box only, display inner electrode layer.
Ms Grace Zhang
________________________________
Oversea sales
Wonderful PCB
A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China
T +86-755-86229518-809 | F +86 755 2607 3529| e wonderful16@wonderfulpcb.com |
w www.wonderfulpcb.com | Skype:wonderful16 | MSN: wonderful16@hotmail.com
(4) Move up: up a layer. Choose the layer which need to up (layer can be a signal layer, it can also be power layer), click the button, then the layer move a layer at the meeting, but not more than the top layer.
(5) Move down: down a layer. Similar as move up button, click on this button, this layer will move down a layer, but not more than the bottom layer.
(6) Properties. Click the button, the pop-up similar as shown in figure 11-3 layer properties dialog box.
11.3.3 Middle layer settle
Completion of the layer stack manager related Settings, click the OK button to exit the layer stack manager, can be done in PCB editor interface related operations. On the middle layer operation, need to first set up the middle layer is displayed in the PCB editor interface. Select “Design”/”Options…” Command the pop-up as shown in figure 11-9 option settings dialog box, under an Internal planes of the electricity option box only, display inner electrode layer.
Ms Grace Zhang
________________________________
Oversea sales
Wonderful PCB
A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China
T +86-755-86229518-809 | F +86 755 2607 3529| e wonderful16@wonderfulpcb.com |
w www.wonderfulpcb.com | Skype:wonderful16 | MSN: wonderful16@hotmail.com
2015年3月13日星期五
Why use surface mount technology (SMT)?
Currently, advanced electronic products, especially in the computer and communications electronics products, has been widely used in SMT technology. SMD devices on year rise in international production, but production is declining conventional device, so as time goes into between, SMT technology will become increasingly popular.
So what is the advantage of SMT in circuit board manufacturing?
1,The pursuit of the miniaturization of electronic products, perforated and plug components used previously been unable to narrow.
2, The electronic product features become more complete, integrated circuit (IC) is no longer used by the piercing element, especially in large-scale, highly integrated IC, had to use surface mount components.
3, Bulk products, production automation, factory should take a low-cost high-volume, producing high quality products to meet customer demand and enhance market competitiveness
4, The development of electronic components, integrated circuits (IC) development, multi-application of semiconductor materials
5, Electronic technology revolution is imperative, chasing the international trend
SMT has become a mainstream technology in the era of high-density, due to the use of SMT technology, PCBA also follow up and get rapid development. SMT market share surge makes more stringent, good PCBA SMT is a prerequisite for success. SMT mainly from the process to control the quality of the process. Today we will introduce single Sided SMT assembly process.
Single Sided SMT assembly process:
Incoming inspection -> screen printing solder paste (dot patch glue) -> patch -> drying (curing) -> reflow soldering -> Cleaning -> Test -> Rework
So what is the advantage of SMT in circuit board manufacturing?
1,The pursuit of the miniaturization of electronic products, perforated and plug components used previously been unable to narrow.
2, The electronic product features become more complete, integrated circuit (IC) is no longer used by the piercing element, especially in large-scale, highly integrated IC, had to use surface mount components.
3, Bulk products, production automation, factory should take a low-cost high-volume, producing high quality products to meet customer demand and enhance market competitiveness
4, The development of electronic components, integrated circuits (IC) development, multi-application of semiconductor materials
5, Electronic technology revolution is imperative, chasing the international trend
SMT has become a mainstream technology in the era of high-density, due to the use of SMT technology, PCBA also follow up and get rapid development. SMT market share surge makes more stringent, good PCBA SMT is a prerequisite for success. SMT mainly from the process to control the quality of the process. Today we will introduce single Sided SMT assembly process.
Single Sided SMT assembly process:
Incoming inspection -> screen printing solder paste (dot patch glue) -> patch -> drying (curing) -> reflow soldering -> Cleaning -> Test -> Rework
2015年3月12日星期四
The Features to FPC
Advantage
(1) Can be freely bent, coiled, folded, may request any arrangements in accordance with the spatial layout, and can be moved and scaled in three-dimensional space, so as to achieve integration of the components assembly and wires connection.
(2) The use of flexible PCB board can greatly reduce the volume and weight of the electronic products.
(3) FPC itself has good heat resistance and weldability, and easy to be packed with low comprehensive cost advantages. The design of Flex-Rigid PCB also make up the shortage of carrying capacity of Flexible base material to components in a certain extent.
2.Disadvantage
(1)High initial cost
Due to Flexible PCB is designed and manufactured for special applications, so start cost for circuit design, circuit layout is relatively higher. Unless there is special demands to apply for flexible PCB, usually FPC is not adopted for small qty demands.
(2)Difficult repair and modification for flexible PCB
Once Flexible PCB finished, if need to be double modified, should be started from the base drawing and Light painting program, so it is not easy for changing. Because there is a cover lay on FPC surface, before repairing, cover lay should be taken off first, and must be redone with cover lay after repair, this is difficult job.
(3)Limitation on size to FPC
Under the condition that the flexible PCB is not very popular, FPC usually made by intermittent method process, thus with restrictions on the size of production equipment, flexible PCB can't be made very long and wide.
(4)Improper operation easily cause damage to FPC
Improper operation taken by worker will cause the damage to flexible circuit and the soldering and rework need to be runed by specially trained operator.
Economy of FPC
If the circuit design is relatively simple, and the total volume is not big, and with appropriate space, the traditional way for internal connection is too much cheaper. If the circuit is complex, and there’s special requirement on electrical or mechanical performance, flexible circuits is a better design option. When the size and performance of the application beyond the ability of rigid PCB, flexible circuit board is the most economical. On a thin film can be made with 5 mil vias and 12 mil pads 3 mil line width and space of flexible circuits. Therefore, mounting chips directly onto the film is more reliable. These films may be protective, and cured at high temperatures, get higher glass transition temperature. Flexible material is more saving on cost compared to rigid material, the reason is out of connector.
Structure of FPC
According to the conductive copper foil layer division, FPC is divided into single layer board, double layer plate, and multi-layer FPC. Single layer plate structure: the structure of flexible plate is the simplest structure of flexible plate. Usually base material + cellophane tape, copper foil is a set of purchased raw materials, protective film + cellophane tape is another purchased raw material. First of all, the copper foil need to be done with etching process to get the needed circuit, protective film need to be done with drilling to reveal the corresponding pad. After cleaning, then use rolling method to combine the two parts. Then to do with gold plating or plating tin on the uncovering part as protection. Then, the large sheet is ready. Generally, the bog sheet should be punched into several unit pieces with required shape an outline. Also some FPC has no requirement on protective film and directly print solder mask onto the copper foil, this way can low down a lot on cost. However, this will weaken the mechanical strength of the FPC. Unless the strength requirement is not high and the price also should be low as far as possible. But it is best to stick the protective film. Double layer FPC structure: when circuit of the circuit is too complex, single plate can’t meet the demand or in need of copper foil for grounding shield, will need to use double layer FPC or multilayer FPC. The most typical difference between multilayer and single layer FPC is there’s vias to connect the copper in every layer. The first process to multilayer FPC is making vias. First do drilling on the base material and copper foil, then cleaning and then plating with a certain thick copper, then vias finished. After above, the later process is the same as single layer FPC. Double layer FPC structure: There are pads on both top and bottom layers. Double layer FPC is mainly used to be connected with other board. Though the structure is similar as single layer FPC, however, big difference on process. It’s raw material is protective film + cellophane tape. First do drilling on the film according to the pad location, then stick the copper foil, when the pad and circuit come out then stick another film which already with vias. Then finished.
(1) Can be freely bent, coiled, folded, may request any arrangements in accordance with the spatial layout, and can be moved and scaled in three-dimensional space, so as to achieve integration of the components assembly and wires connection.
(2) The use of flexible PCB board can greatly reduce the volume and weight of the electronic products.
(3) FPC itself has good heat resistance and weldability, and easy to be packed with low comprehensive cost advantages. The design of Flex-Rigid PCB also make up the shortage of carrying capacity of Flexible base material to components in a certain extent.
2.Disadvantage
(1)High initial cost
Due to Flexible PCB is designed and manufactured for special applications, so start cost for circuit design, circuit layout is relatively higher. Unless there is special demands to apply for flexible PCB, usually FPC is not adopted for small qty demands.
(2)Difficult repair and modification for flexible PCB
Once Flexible PCB finished, if need to be double modified, should be started from the base drawing and Light painting program, so it is not easy for changing. Because there is a cover lay on FPC surface, before repairing, cover lay should be taken off first, and must be redone with cover lay after repair, this is difficult job.
(3)Limitation on size to FPC
Under the condition that the flexible PCB is not very popular, FPC usually made by intermittent method process, thus with restrictions on the size of production equipment, flexible PCB can't be made very long and wide.
(4)Improper operation easily cause damage to FPC
Improper operation taken by worker will cause the damage to flexible circuit and the soldering and rework need to be runed by specially trained operator.
Economy of FPC
If the circuit design is relatively simple, and the total volume is not big, and with appropriate space, the traditional way for internal connection is too much cheaper. If the circuit is complex, and there’s special requirement on electrical or mechanical performance, flexible circuits is a better design option. When the size and performance of the application beyond the ability of rigid PCB, flexible circuit board is the most economical. On a thin film can be made with 5 mil vias and 12 mil pads 3 mil line width and space of flexible circuits. Therefore, mounting chips directly onto the film is more reliable. These films may be protective, and cured at high temperatures, get higher glass transition temperature. Flexible material is more saving on cost compared to rigid material, the reason is out of connector.
Structure of FPC
According to the conductive copper foil layer division, FPC is divided into single layer board, double layer plate, and multi-layer FPC. Single layer plate structure: the structure of flexible plate is the simplest structure of flexible plate. Usually base material + cellophane tape, copper foil is a set of purchased raw materials, protective film + cellophane tape is another purchased raw material. First of all, the copper foil need to be done with etching process to get the needed circuit, protective film need to be done with drilling to reveal the corresponding pad. After cleaning, then use rolling method to combine the two parts. Then to do with gold plating or plating tin on the uncovering part as protection. Then, the large sheet is ready. Generally, the bog sheet should be punched into several unit pieces with required shape an outline. Also some FPC has no requirement on protective film and directly print solder mask onto the copper foil, this way can low down a lot on cost. However, this will weaken the mechanical strength of the FPC. Unless the strength requirement is not high and the price also should be low as far as possible. But it is best to stick the protective film. Double layer FPC structure: when circuit of the circuit is too complex, single plate can’t meet the demand or in need of copper foil for grounding shield, will need to use double layer FPC or multilayer FPC. The most typical difference between multilayer and single layer FPC is there’s vias to connect the copper in every layer. The first process to multilayer FPC is making vias. First do drilling on the base material and copper foil, then cleaning and then plating with a certain thick copper, then vias finished. After above, the later process is the same as single layer FPC. Double layer FPC structure: There are pads on both top and bottom layers. Double layer FPC is mainly used to be connected with other board. Though the structure is similar as single layer FPC, however, big difference on process. It’s raw material is protective film + cellophane tape. First do drilling on the film according to the pad location, then stick the copper foil, when the pad and circuit come out then stick another film which already with vias. Then finished.
8 Rules of PCB Design
A PCB is the abbreviation of Printed Circuit board. All the components on the circuit board are held in position by drilling holes or Pads in the demarcated areas on the board, and then soldering the components into place. The copper tracks which take the place of traditional wires are more effective and more resistant to damage. The copper tracks place a rule as link among all the components, forming a circuit underneath the board. Keeping some simple rules in mind can avoid that we have to contact you after you place an order to resolve PCB design issues.
Before PCB design, please remember 8 rules as below:
·Everything starts with the circuit design. Without a circuit there is no need for a PCB. In the old days most circuits were hand drawn and later captured electronically. In today’s world of modern computing, the circuit design is capture directly into a schematic. For the sake of clarity we’ve added this in the PCB design rule.
·Always lay out your board design on a fixed grid or a snap grid so that the components and tracks will be able to “snap into place.” It is important to use the grid to make sure you have enough space on the PCB board material for all the components and it will allow you to have fluid copper tracks rather than bits and pieces all over the place.
·Please make sure you provide an indication of the layer definitions in the copper, such as a caption: “TOP” in the top layer, “BOT” in the bottom layer. Missing or incorrect labeling is the most frequent cause of problems, since many Layout programs permit mirrored data output! For this reason, please label your circuit boards always with TOP and BOT in the copper! Correct labeling with TOP and BOT in the circuit board’s copper provides information about the layer definition, and also for the layer orientation!
·Track sizes will vary depending on the type of board you are designing, the purpose of the board and how much conduction is necessary. It is always possible to use different sized tracks to allow for bridging or tightly spaced tracks.
·Place each route and each component in their grid off the board then when you are sure of its position, place them on the circuit board individually in order to maximize your efficiency and reduce your margin for errors.
·Do not scale your data – Please keep all data be scale 1/1 (100 %).
·Use the same units (mm or inch) in your Gerber & Exelon output files as in your CAD PCB design software. This will eliminate conversion or rounding errors.
·Lastly, you shouldn’t be sending Eagle BRD files to board houses anyway. That leaves too many judgment calls for the board house to make. Create the Gerber files yourself, then the board house knows what to do, and you can take the files to any other board house too. Most board houses don’t want Eagle files, or charge extra for doing the conversion to Gerber for you.
Before PCB design, please remember 8 rules as below:
·Everything starts with the circuit design. Without a circuit there is no need for a PCB. In the old days most circuits were hand drawn and later captured electronically. In today’s world of modern computing, the circuit design is capture directly into a schematic. For the sake of clarity we’ve added this in the PCB design rule.
·Always lay out your board design on a fixed grid or a snap grid so that the components and tracks will be able to “snap into place.” It is important to use the grid to make sure you have enough space on the PCB board material for all the components and it will allow you to have fluid copper tracks rather than bits and pieces all over the place.
·Please make sure you provide an indication of the layer definitions in the copper, such as a caption: “TOP” in the top layer, “BOT” in the bottom layer. Missing or incorrect labeling is the most frequent cause of problems, since many Layout programs permit mirrored data output! For this reason, please label your circuit boards always with TOP and BOT in the copper! Correct labeling with TOP and BOT in the circuit board’s copper provides information about the layer definition, and also for the layer orientation!
·Track sizes will vary depending on the type of board you are designing, the purpose of the board and how much conduction is necessary. It is always possible to use different sized tracks to allow for bridging or tightly spaced tracks.
·Place each route and each component in their grid off the board then when you are sure of its position, place them on the circuit board individually in order to maximize your efficiency and reduce your margin for errors.
·Do not scale your data – Please keep all data be scale 1/1 (100 %).
·Use the same units (mm or inch) in your Gerber & Exelon output files as in your CAD PCB design software. This will eliminate conversion or rounding errors.
·Lastly, you shouldn’t be sending Eagle BRD files to board houses anyway. That leaves too many judgment calls for the board house to make. Create the Gerber files yourself, then the board house knows what to do, and you can take the files to any other board house too. Most board houses don’t want Eagle files, or charge extra for doing the conversion to Gerber for you.
订阅:
博文 (Atom)
















