显示标签为“Multilayer printed circuit board”的博文。显示所有博文
显示标签为“Multilayer printed circuit board”的博文。显示所有博文

2015年3月30日星期一

Gold Finger PCB

Edge connector with Nickel plating (Ni) and gold (Au), suitable to wear style application for a full-featured product and customized quote. Tied using industry standard protocols allow electric plating nickel plating and the African Union in the etching.

With your Au selection, a standard 30-degree bevel will be added to your edge connector. We can also bevel at 15 or 45 degrees upon request. For multi-layer boards please insure adequate inner layer back set for the bevels. Gold Finger is the memory and the memory slots on the connection between the parts, all the signals are transmitted through the finger to. Gold finger by numerous golden composed of conductive contacts, but also because of its gold-plated conductive surface such as a finger-like arrangement of the contacts, so called "Gold finger." Gold finger is actually in the CCL through a special process and then covered with a layer of gold, because gold is very strong antioxidant activity, but also very strong conductivity. But because of the expensive price of gold is currently more memory are used instead of tin from the 90s of last century began to spread solder material, the current motherboard, memory and graphics cards and other devices "Gold finger" are almost always used tin material, only some high-performance server/workstation accessories will continue to use gold-plated contact point approach, the price of natural cheap.

Finger edge connectors are usually inserted into the mating groove to ease the connector. When this happens, the heart of the aircraft may be exposed copper if they do not quit this advantage fully. We will take you back to the inner layer of copper is higher than shown on the right in order to avoid exposure to copper in this location. Copper can cause direct exposure to all terminals short connector into it.

Wonderfulpcb is an experienced Aluminum pcb,Flexible pcb,Rigid-flex pcb,Multilayer pcb,PCBA manufacturer,PCB board manufacturer,provide various of printed circuit boards at competitive prices

2015年3月16日星期一

Multilayer PCB design method (W)

11.4.1 The Multilayer PCB design related Settings
1. Power Plane Clearance
This rule is used to set the electric layer security spacing, mainly refers to no Internet connection and the electrical layer of bonding pad and the hole and the electrical layer security spacing, as shown in figure 11 -11. At the time of manufacture, no Internet connection and the electrical layer of bonding pad in through electrical layer around the copper film is corrosion, corrosion of the size of the ring is, the value of the constraint set.

2. Power Plane Connect Style
This rule is used to set the electric welding plate and the layer forms.Mainly refers to a network connection with the electrical layer within the welding plate and the hole and the electrical connection between the form. As shown in figure 11-12.

Click the Properties button, pop-up its rules Settings dialog box, as shown in figure 11-13., the applicable scope of the rules on the left side of the dialog box to Rule the Attributes on the right side of the drop-down list to choose connection mode: Relief Connect, Direct Connect and No Connect. The Direct Connect directly connected, the electric welding plate inside through layer did not drop the copper film around the corrosion, electric welding plate and inside layer copper film directly connected;No connect to show No connection, that is, with the copper film network bonding pad of the same name will not be connected to the inside electrode layer;Designers usually use the system default Relief Connect connection forms, the rules of the Settings dialog box shown in figure 11-13.

Ms Grace Zhang
________________________________
Oversea sales
Wonderful PCB
A Floor 6, Nanyuan Fengye Mansion, Nanshan Avenue, Nanshan District, Shenzhen City 518054, China

T +86-755-86229518-809 | F  +86 755 2607 3529|  e  wonderful16@wonderfulpcb.com |
w  www.wonderfulpcb.com  | Skype:wonderful16 | MSN: wonderful16@hotmail.com